Our Company |   Join Our Club |      

news categories



news per location



May 2017



Read our bloggers



Power Plants



  • Directorio de Eficiencia energética

Mycon and Kipp Umwelttechnik solve a problem in the area of air conditioning at Vienna Airport

Jump to the comments

At the Vienna airport the external heat exchangers were highly contaminated with dust, especially by cement, lime and gypsum dust, due to the surrounding industrial environment. These situations severely impacted the cooling performance. Such pollution causes energy costs to rise rapidly by 10-30% or more. The corrosion caused by contamination can also lead to a significant reduction in the service life of heat exchangers. Several cleaning attempts of the extreamly dirty heat exchangers - 10 units with a total area of more than 400 square meters - had been mostly unsuc-cessful for years. Through a cleaning trial with chemicals, the dusts became very hard like "cement" and the lamellas/fins have started to corrode due to chemical reactions.

In cooperation with the sister company mycon, Kipp Umwelttechnik successfully im-plemented combination of "JetMaster" system with three other devices. Significant amounts of residues were removed from the heat exchangers. The cleaning effect was so great that the through-value of the heat exchangers is almost returned to a new state after cleaning.

Mr. Rödler, Facility Management, Head of Domestic Engineering:

"The exposed location of our airport in an area with a large number of huge industrial companies has led to a considerable strain on our heat exchangers. With the use of the JetMaster system with several process steps, Kipp Umwelttechnik was the first company which was able to achieve our desired effect of a complete cleaning. All previous cleaning attempts by other companies had been more or less ineffective. "

The JetMaster process and it's advantages:

The JetMaster process has been developed with the support of the Federal Ministry of Economics and Technology in cooperation with a university and offers considera-ble advantages such as- high cleaning quality, cost effective and environmentaly friendly. JetMaster works exclusively with compressed air and a small volume of normal water (drinking water quality). Compared to cleaning with a high-pressure cleaning instrument, the advantages are obvious: less water consumption, more gen-tle cleaning without damaging the sensitive lamella/fins, greater cleaning level. A cavitation effect ensures a high cleaning efficiency in less time. By not using chemi-cal additives, there is no additional burden for cleaning staffs and the environment.

Sustainable Building | News published on 12 / 05 / 2017 by Rashmi Nargundkar

Comments in this news Add yours

There are no comments. Add your comment

  Other Interesting News

Bill Giunta joins Perkins New Feed-In Tariffs in Denmark, Poland create Market Prospects to European Small Wind Sector IBC SOLAR grants “Premium Partner Awards 2015” to 30 PV experts Crompton Greaves Limited is now CG Power and Industrial Solutions Limited. MNRE signs Mou with the National Housing Bank (NHB)