Page 81

energetica-india-55

Greenvision Technologies’ RELICELL- GEL VRLA Batteries Relicell from Greenvision Technologies is a range of lead acid batteries. Relicell GEL VRLA batteries are maintenance free batteries with a special gel electrolyte made by mixing acid electrolyte with pyrogenic silica. The design uses pasted plate grids with a large surface area with grids casted from a special lead-calcium-tin-silver alloy that provides high corrosion resistance, and a special micro porous synthetic separator. A Relicell GEL VRLA battery offers a much higher cyclic life & operates better in partial state of charge and in high temperatures. These features make it a supreme choice for solar applications and for UPS applications that face long power outages and high temperature conditions. It’s thus idyllically designed to operate in environmental conditions prevailing in the Indian sub continent, Africa and much of South East Asia. Features • Design Life Of 15 Years At 27°C • High Purity Lead-Calcium Tin-Silver Alloy for Good Corrosion Resistance. • Micro Porous Synthetic Separators Provide Low Electrical Resistance. • Addition of Phosphoric Acid for Improved Cyclic Life. • Cycle Life of 500 Cycles At 100% DoD, 1500 Cycles At 40% DoD. • Very Low Thermal Runaway Effect Due To Silica Gel Composition. • High Purity Material Ensuring Low Self Discharge • Completely Leak Proof and Maintenance Free. • High Impact ABS Casing. Applications- • Solar & Wind Energy Storage • Solar Streets & Traffic Lights • UPS with Long Backup • Home Inverters • Telecommunications Power Supply • Power Station Systems & Power Plant • Electric & Recreational Vehicle SMA India’s SUNNY TRIPPOWER SERIES – 20000 TL Economic Excellence Solar Inverter SMA India’s new Sunny Tripower TL Economic Excellence is the subsequently rational step in the progress of the Sunny Tripower series in terms of achieving an optimal price-performance ratio. It brings with it a substantial reduction in investment costs, while guaranteeing remarkably high yields with an efficiency of 98.5 %. This makes it an idyllic solution for uniformly structured PV plants on the medium to very large scale. The focus is on the fundamentals and meets all needs, including reactive power provision, grid support, and grid management integration. Features Economical • Maximum efficiency 98.5 % • SMA OptiTrac MPP tracking for best MPP tracking efficiency • Active temperature management with OptiCool Technical Data Input (Dc) • Bluetooth communication Simple • Three-Output (Ac) phase grid feed-in • Cable connection without tools SUNCLIX DC plug-in system Flexible and future-proof • DC input voltage up to 1 000 V • Integrated grid management functions • Reactive-power capable Technical Data Input (Dc) Max. DC power (@ cos = 1) / DC rated power 20 450 W / 20 450 W Max. input voltage 1000 V MPP voltage range with a line voltage of 230 V / rated input voltage 580 V – 800 V / 580 V Min. input voltage / start input voltage 570 V / 620 V Max. input current 36 A Max. input current per string 36 A Number of independent MPP inputs / strings per MPP input 1.6 Output (Ac) Rated power (@ 230 V, 50 Hz) 20000 W Max. apparent AC power 20000 VA AC nominal voltage 3 / N / PE, 230 V / 400 V AC voltage range 160 V – 280 V AC power frequency / range 50 Hz / 44 Hz ... 55 Hz 60 Hz / 54 Hz ... 65 Hz Rated power frequency / rated grid voltage 50 Hz / 230 V Max. output current / Rated output current 29 A / 29 A Power factor at rated power / Displacement power factor, adjustable 1 / 0 overexcited ... 0 underexcited THD ≤ 2,6 % Feed-in phases / connection phases 3 Efficiency 29 A / 29 A Max. efficiency / European weighted effi ciency 98.5 % / 98.2 % Protective devices Input-side disconnection point Optional Ground fault monitoring / grid monitoring Standard DC surge arrester (SPD type III / SPD type II) can be integrated Standard DC reverse polarity protection / AC short-circuit current capability / galvanically isolated Not Available All-pole-sensitive residual-current monitoring unit Standard Protection class (as per IEC 62109-1) / overvoltage category (as per IEC 62109-1) I / AC: III; DC: II General data Dimensions (W/H/D) 665 / 680 / 265 mm (26.2 / 26.8 / 10.4 inch) Weight 45 kg (99.2 lb) Operating temperature range -25 °C ... +60 °C (-13 °F ... +140 °F) Noise emission (typical) 51 dB(A) Self-consumption (at night) 1W Topology / cooling concept Transformerless / OptiCool Degree of protection (per IEC 60529) IP65 Climatic category (as per IEC 60721-3-4) 4K4H Maximum permissible value for relative humidity (non-condensing) 100% Protective devices General data Features / function energetica INDIA · JAN | FEB16 81 Features / function Max. DC power (@ cos = 1) / DC rated power 20 450 W / 20 450 W Max. input voltage 1000 V MPP voltage range with a line voltage of 230 V / rated input voltage 580 V – 800 V / 580 V Min. input voltage / start input voltage 570 V / 620 V Max. input current 36 A Max. input current per string 36 A Number of independent MPP inputs / strings per MPP input 1.6 Rated power (@ 230 V, 50 Hz) 20000 W Max. apparent AC power 20000 VA AC nominal voltage 3 / N / PE, 230 V / 400 V AC voltage range 160 V – 280 V AC power frequency / range 50 Hz / 44 Hz ... 55 Hz 60 Hz / 54 Hz ... 65 Hz Rated power frequency / rated grid voltage 50 Hz / 230 V Max. output current / Rated output current 29 A / 29 A Power factor at rated power / Displacement power factor, adjustable 1 / 0 overexcited ... 0 underexcited THD ≤ 2,6 % Feed-in phases / connection phases 3 Efficiency 29 A / 29 A Max. efficiency / European weighted effi ciency 98.5 % / 98.2 % Input-side disconnection point Optional Ground fault monitoring / grid monitoring Standard DC surge arrester (SPD type III / SPD type II) can be integrated Standard DC reverse polarity protection / AC short-circuit current capability / galvanically isolated Not Available All-pole-sensitive residual-current monitoring unit Standard Protection class (as per IEC 62109-1) / overvoltage category (as per IEC 62109-1) I / AC: III; DC: II Dimensions (W/H/D) 665 / 680 / 265 mm (26.2 / 26.8 / 10.4 inch) Weight 45 kg (99.2 lb) Operating temperature range -25 °C ... +60 °C (-13 °F ... +140 °F) Noise emission (typical) 51 dB(A) Self-consumption (at night) 1W Topology / cooling concept Transformerless / OptiCool Degree of protection (per IEC 60529) IP65 Climatic category (as per IEC 60721-3-4) 4K4H Maximum permissible value for relative humidity (non-condensing) 100% DC terminal / AC connection SUNCLIX / Spring clamp terminal Display Chart Interfaces: RS485, Bluetooth®, Speedwire/Webconnect Standard Data interface: SMA Modbus / SunSpec Modbus Standard Multi-function relay / Power Control Module Not Available Integrated Plant Control / Q on Demand 24/7 Not Available Off-Grid capable / SMA Fuel Save Controller compatible Standard Warranty: 5 / 10 / 15 / 20 / 25 years Standard Certificates and approvals ANRE 30, AS 4777, BDEW 2008, C10/11:2012, CE, CEI 0-16, CEI 0-21, EN 50438*, G59/3, IEC 60068-2-x, IEC 61727, IEC 62109- 1/-2, IEC 62116, MEA 2013, NEN EN 50438, PEA 2013, PPC, PPDS, RD 1699/413, RD 661/2007, SI4777, UTE C15-712-1, VDE 0126-1-1, VDE-AR-N 4105 Type designation STP 20000TLEE-10


energetica-india-55
To see the actual publication please follow the link above